Lasers¶
Supported lasers¶
Line laser¶
Red Class 1 line laser.
Name | Value |
Wavelength | 650 nm |
Voltage | 5 V |
Working distance | 300 mm |
Output aperture | 3 mm |
Output power | 2.5 mW |
Fan angle | > 60 º |
Body diameter | 8 mm |
Body length | 26 mm |
Wire length | 250 mm |
Security class | 1 |
TÜV certificate | Yes |
Warning
Only Class 1 lasers according to IEC 60825-1:2014 are recommended to ensure eye safety. The emission limits for this wavelength must be less than 390 uW.
Gcodes¶
M71¶
Switch on the laser specified in the T command.
Example: | M71 T2 |
---|
Note
Lasers are switched off automatically after 255 seconds as a safety measure.
Troubleshooting¶
Laser not detected correctly¶
If the laser is not detected correctly:
- Improve the environment light conditions.
- Adjust the camera settings in Adjustment workbench:
- Scan capture > Laser for the laser over the scanning object.
- Calibration capture > Laser for the laser over the pattern.